Türkçe
GENERAL EXPLANATION
This training set is produced to explain the working principle of elevator systems used today in a simple way.
TECHNICAL SPECIFICATION
The elevator training set is designed to examine the structure and operation of a real four-storey elevator. The Elevator Training Set is transparent with its mechanical structure visible. Input-output and control units are located at the top of the set and placed on compact laminate material.
TECHNICIAL SPECIFICATIONS
Start, stop and emergency stop buttons, 25A / 30mA residual current relay, 10 A neutral break fuse,
PLC with 14DI / 10DO / 2AI / Profinet connection (All IO ends of the PLC have been moved to the control panel.)
Microcontroller with 33 inputs and outputs (All IO terminals of the microcontroller except the LCD and pins used for serial communication have been moved to the control panel.
4×20 LCD, microcontroller reset button and D9 female connector, (20MHz bootloader is loaded on the microcontroller and can be programmed through the serial port.)
24V DC / at least 6A SMPS,
Inductive sensors for floors and upper and lower limits,
LED indicators showing up and down movements,
Light indicator on which all digital inputs and outputs are observed,
Eight ON-OFF-MOM switches,
7 segment floor level indicators + 24V and GND outputs,
Geared 24V DC motor, 24V buzzer,
Counterweight system,
24 different colored jacked test connection cables,
IEC power cable,
