HT-330 NATURAL AND FORCED HEAT TRANSFER TRAINING SET

+ -

GENERAL EXPLANATION
 
This training set includes; natural and forced convection heat transfer mechanism. The device can examine the heat balance, the energy balance of the inner tube transfer, the Nusselt, Graetz number changes in the natural and forced state.
 
TECHNICAL SPECIFICATION
 
Heat transfer is analyzed in two parts as natural and forced according to the motion of the fluid. At the beginning, the oil in the tank is heated by a 1kW resistance to generate heat energy. At the same time, the water taken from the network is used as the system where the energy is transferred. In the natural flow; the pump in the device is deactivated, the heated oil rises and the heat exchanger is switched on and the energy is transferred to the other system. The heat transfer here is low. In the forced flow, the pump is activated and the oil sends a heat exchanger with a specific action. The heat transfer there is higher than the natural flow. At the same time, the direction of the installation fluid is changed and heat transfer experiments are carried out by reverse flow.

Teknik Detaylar
 
Isıtma ve sirkülasyon Sistemi
1 kW rezistans
3 hız kademeli ve 2mss basma kapasiteli
Sirkülasyon pompası
En az 50°C yağ sıcaklığı
En az 2L ısıtma tankı
İç içe borulu ısı değiştirici
 
Opsiyonel Özellikler
 
Dokunmatik LCD Ekran
USB Bilgisayar Bağlantısı
Bilgisayar Kontrolü
 
Çalışma Gereklilikleri
 
220V AC şebeke beslemesi
Şebeke su tesisatı
 
Garanti ve Servis Hizmetleri
 
Cihaz 2 yıl boyunca firmamız tarafından garantilidir. 10 yıl boyunca ücreti mukabilinde teknik destek ve servis hizmeti verilmektedir.
 
Cihaz Ölçüleri
 
A x B x H: 1180 x 450 x 1500 mm

PDF Product Document