GENEL AÇIKLAMA
Bu eğitim seti yüksekokullardaki ve fakültelerdeki Isı Değiştiriciler ve Isı Transferi derslerinde işlenen kuramsal konuların ve hesaplamaların uygulamalarla desteklenmesi amacıyla tasarlanmıştır. 4 farklı ısı değiştirici ve 7 farklı yöntemle 8 deney yapılabilmektedir. Her bir ısı değişim noktası ısı sensörleri ve termometreler ile kontrol edilebilmektedir.
ÇALIŞMA PRENSİBİ
4 Tip ısı değiştirici ile 7 farklı yöntem ile deneyler yapılmaktadır. Isı değiştiricileri; yüzey boru tipi, iç içe borulu, fanlı serpantin ve plakalı ısı değiştirici. Tesisat akışkanı vanalar ile istenilen ısı değiştiriciye yönlendirebilir, akışkan yönü değiştirilebilir. Isı, ısıtıcı tankındaki 2kW güce sahip rezistans tarafından üretilmektedir. Isının üretildiği ve aktarıldığı sistemin giriş-çıkış sıcaklığı sensörler tarafından ölçülmektedir.GENERAL DESCRIPTION
This training set is designed to support the theoretical topics and calculations covered in Heat Exchangers and Heat Transfer courses in colleges and faculties with applications. 8 experiments can be performed with 4 different heat exchangers and 7 different methods. Each heat exchange point can be controlled with heat sensors and thermometers.
WORKING PRINCIPLE
Experiments are carried out with 7 different methods with 4 types of heat exchangers. Heat exchangers; surface tube type, concentric tube, fan coil and plate heat exchanger. The installation fluid can be directed to the desired heat exchanger via valves, and the fluid direction can be changed. Heat is produced by the 2kW resistor in the heater tank. The input and output temperature of the system where heat is produced and transferred is measured by sensors.