Genel Bakış
Bu eğitim seti yüzen cismin dengesini ve yüzme merkezinin belirlenmesini deneysel olarak göstermek amacıyla tasarlanmıştır.
Çalışma Prensibi
Deney tesisatı, şeffaf silindirik kap içine dikey olarak yerleştirilmiş ucu konik bir su borusundan oluşmaktadır. Deneyde test edilecek düz levha şeklindeki katı yüzey parçası, su jetinin tam üzerinde, bir ucu döner mesnetli, bir yay ile desteklenmiş ve üzerinde kayar bir kütle bulunan ölçekli bir kirişe bağlı olarak bulunmaktadır. Silindirik kabın tabanında, suyun ölçme tankına aktarıldığı bir delik vardır. Bir katı yüzeye çarparak yön değiştiren su jetinin momentumu ile etkenliği kuvvet arasındaki ilişkiyi deneysel olarak test edilmektedir. FML 15 Hidroloji Ana Ünitesinin çalışma yüzeyine yerleştirilip buradan su jetinin çalışması sağlanır. Su debisi Hidroloji Ana Ünitesi üzerinden ayarlanır.GENERAL EXPLANATION
This training set is designed to demonstrate the fit of theory with the amount of momentum created by the water jet in the fluid spaces, using counterweights.
TECHNICAL SPECIFICATION
The training module consists of a conical water pipe vertically placed in a transparent cylindrical container. The solid surface piece of flat plate to be tested in the experiment is attached directly to the water jet by a scalloped bell supported by a spring with a rolling support and with a sliding mass on it. At the bottom of the cylindrical container is a hole through which the water is transferred to the metering tank. The relationship between the momentum and the force of action of a water jet that changes direction by multiplying by a solid surface is experimentally tested. The FML 15 Hydrology Main Unit is placed on the working surface and the water jet is run from there. The water flow is set via the Hydrology Main Unit.