İletişime Geç

K-230 Evaporatif Soğutma Eğitim Seti K-230 EVAPORATIVE COOLING TRAINING SET

K-230 Evaporatif Soğutma Eğitim Seti K-230 EVAPORATIVE COOLING TRAINING SET

 0,00

[:tr]Teknik Detaylar

Fan Hız Kontrol
Kule dolgusu
Otomatik su besleme
4 noktada sıcaklık sensörü
2 noktada nem sensörü
Hava hız ölçer

Opsiyonel Özellikler

Dokunmatik LCD Ekran
USB Bilgisayar Bağlantısı
Bilgisayar Kontrolü

Çalışma Gereklilikleri

220V AC şebeke beslemesi
Şebeke su tesisatı

Garanti ve Servis Hizmetleri

Cihaz 2 yıl boyunca firmamız tarafından garantilidir. 10 yıl boyunca ücreti mukabilinde teknik destek ve servis hizmeti verilmektedir.

Cihaz Ölçüleri

A x B x H: 800 x 600 x 1280 mm[:en]TECHNICAL DETAILS
 
Fan Speed Control
Tower fill
Automatic water supply
4-point temperature sensor
2 point moisture sensor
Air speed meter
 
OPTIONAL FEATURES
 
Touch LCD Display
USB Computer Connection
Computer Control
 
PACKAGE INCLUDED
 
Device, device cover, 1 printed experiment report, circuit diagram and product catalog
 
DEVICE MEASUREMENTS
 
A x B x H: 800 x 600 x 1280 mm[:]

Genel Bakış

Bu eğitim seti evaporatif soğutma işleminin temel prensiplerini deneysel olarak gözlemlemek amacıyla tasarlanmıştır.

Çalışma Prensibi

Kuru ve sıcak havanın ıslak bir yüzeyden geçerken buharlaşan suyun, havadan buharlaşma ısısını çekmesi sonucu meydana gelen sıcaklık düşmesine “evaporatif soğutma” denir. Sistemde %100 dış taze hava kullanılır. Bu nedenle doğal soğutma olarak da adlandırılır. Evaporatif soğutmada suyun buharlaşması için gereken ısının ortamdan alınması işlemin esasını oluşturur. Suyun buharlaşması ile birlikte ortamdan gizli ısı alınmakta, duyulur ısı aynı kalmaktadır. Sistemde mekanik parça olarak fan ve su pompası bulunur. Su pompası sistemin su haznesindeki suyu buharlaşmanın olacağı petek yüzeye püskürtür. Dış ortamdan alınan taze hava fan yardımıyla bu nemli elyafın içinden geçirilir. Bu hava geçişi sırasında hava soğur. Çünki; buharlaşan suyun havadan buharlaşma ısısını çekmesi sonucu meydana gelen sıcaklık düşmesi nedeniyle oluşan serinlik havayı da soğutur.GENERAL EXPLANATION
 
This training set is designed to experimentally observe the basic principles of the evaporative cooling process.
 
TECHNICAL SPECIFICATION
 
Evaporation of dry and hot air from a wet surface is referred to as “evaporative cooling” when the temperature drops from the air to evaporate from the air. 100% external fresh air is used in the system. For this reason, it is also called natural cooling. In evaporative cooling, the heat required to evaporate water forms the basis for the removal from the environment. With the evaporation of water, latent heat is taken from the environment and the sensible heat remains the same. The system has a fan and water pump as mechanical parts. The water pump system sprays the water in the water reservoir onto the honeycomb surface where the water evaporates. Fresh air from outside is passed through this moist fiber by means of a fan. The air cools during this air pass. Because; the evaporation of water from the air evaporation heat is the result of the drop in temperature resulting from the coolness of the air is also cooled.